Application: Use as the first primer on a clean and dry concrete floor. For factory floor, factory, industrial park, garage, basement, ... not used for food, medical
Specification: Box of 4 Sets of 5 Liter, Set of 17.5 Liter
EXLBT epoxy workshop concrete primer is the first layer to cover the surface of the concrete substrate after cleaning the surface and no longer moisture. This is the most suitable product for concrete substrates. The cost-saving solution when choosing an epoxy floor. With high quality EXLBT Benzo liner in line with Vietnamese metrology standards.
Belongs to the two-component Epoxy coating line with the formula specifically for concrete floors. With benzo primer film adhesion very well on the background. In particular, the product has been certified to have high quality quatest 3, conformity of the construction set, ... With cost saving and real quality compared to brands of the same type. Achieve investor satisfaction not only with products but also convenient and fast support services.
Figure 1: High quality Epoxy concrete foundation primer
Benefits: The primer prevents moisture from evaporating from the inside, protects the coating and helps to adhere well to the next paint film of products at sonbenzo Website. Helps the paint film have a beautiful and flat surface.
+ Fast drying time
That is a very important property for concrete foundation paint. Fast drying harden in about 30 minutes. Accelerate the construction progress of factory floor of the contractor. But still ensuring quality with the benefits followed.
+ Paint film to adhere to the concrete well
Once cleaned, dirt, grease, water, moisture, ... EXLBT primer adhere to the surface of the concrete floor. Form a thick hard coating capable of protecting the agents from the inside. Facilitates long-term use when using epoxy primers on factory concrete.
+ High coverage saves costs
EXLBT primer coatings are 8-10 m2 / liter for good builders. High coverage rating but good protection. Save a lot of costs for the whole factory foundation works.
Figure 2: First primer on concrete floor
Use a floor grinding machine to create a flat, rough surface for the concrete. Clean dirt with an industrial vacuum cleaner. Also, use a hygrometer to check that the standard dryness is reached.
ĐẶC TÍNH
Feature
|
Là một loại sơn 2 thành phần có gốc từ Bisphenol-A & Epichlorohydrin. Kết hợp với Polyamide nên sơn có độ dẻo dai, bám dính tuyệt vời, kháng hoá chất khả năng chịu nhiệt, nước, dầu mỡ, chống ăn mòn cao.
This is a two-component coating derived from Bisphenol-A & Epichlorohydrine. Combined with Polyamide, the coating has toughness with its excellent adhesion, resistance to chemicals, heat, water, oil and has high anti-corrosion feature.
|
|||||||||||
CÔNG DỤNG
Usage
|
Dùng làm lớp sơn lót đầu tiên trên nền bê tông.
Use as first primer on concrete
|
|||||||||||
MÀU SẮC
Colors
|
Thông thường: Màu trong suốt
Normal: transparent color
|
|||||||||||
TỶ TRỌNG
Specific weight
|
Thông thường: 0,99 ± 0,05 kg/lít
Normal: 0,99 ± 0.05 kilogram/liter
|
|||||||||||
HÀM LƯỢNG RẮN
Volume Solid |
60%
|
|||||||||||
XỬ LÝ BỀ MẶT
Surface cleaning
|
Bề mặt cần sơn phải được xử lý sạch và khô, không còn dầu mỡ, bụi bẩn tạp chất.
Surfaces for coating should be treated, to be clean and dry, no grease, dirt or impurities.
|
|||||||||||
DỤNG CỤ SƠN
Coating equipments |
Distance from spray to structure need to be painted about 0.4 m.
Injection pressure: 100 - 150 kg/sqcm.
Khoảng cách từ súng phun sơn đến cấu kiện cần sơn khoảng 0.4 m. Áp suất phun: 100 - 150 kg/cm2.
|
|||||||||||
CHẤT PHA LOÃNG
Thinner
|
Benzo N809, tỷ lệ 10 - 25% theo thể tích.
Benzo N809, ratio 10 - 25% by volume.
|
|||||||||||
TỶ LỆ PHA SƠN
Mixing ratio
|
Khuấy, quậy đều phần A và phần B (đóng rắn) theo tỷ lệ 4:1 (theo thể tích).
Mixing part A (Base) and part B (Hardener) in ratio 4:1 (by volume).
|
|||||||||||
T.GIAN SỬ DỤNG
Used time
|
5 giờ ở 30oC kể từ khi pha sơn.
Within 5 hours at 30°C (After mixing).
|
|||||||||||
ĐỘ DÀY CHUẨN
Standard DFT
|
Màng sơn khô: 60 ± 10 µm/lớp (Trung bình).
Dry coating: 60 ± 10 µm/coating (Average.)
|
|||||||||||
ĐỘ CHE PHỦ
Coverage (Consumption)
|
Lý thuyết: ≈ 10 m2/lít/lớp.Tùy thuộc vào điều kiện bề mặt, môi trường, phương pháp sơn,…
Theory: ≈ 10 sqm/liter/coating. Paint rating can vary according to colors, surface conditions, environment, methods of painting, etc.
|
|||||||||||
THỜI GIAN KHÔ
Drying period
|
Khô sờ được: 30 phút ở 30oC.
Khô hoàn toàn (chết sơn): 12 – 24 giờ. Sơn lớp kế tiếp: 4 - 6 giờ ở 30°C. Touchable dry: 30 minutes at 30°C.
Hard dry (movable): 12-24 hours at 30°C. Time for next coating: 4-6 hours at 30°C. |
|||||||||||
BAO BÌ
Packaging
|
Bộ 17.5 lít : Phần A (Base) + Phần B (Hardener)
Bộ 5 lít : Phần A (Base) + Phần B (Hardener) Bộ 1 lít : Phần A (Base) + Phần B (Hardener) Set 17.5 liters included A (Base) + B (Hardener)
Set 5 liters included A (Base) + B (Hardener) Set 1 liter included A (Base) + B (Hardener) |
|||||||||||
HẠN BẢO QUẢN
Storage period
|
36 tháng.
36 months.
|
Chú ý: Sơn Epoxy có độ bền rất cao nhưng do bản chất nhựa Epoxy dễ bị phân hoá dưới ánh nắng trực tiếp, điều này ảnh hưởng tới độ thẩm mỹ của màng sơn .
Note: Epoxy Paint has high durability but it’s easy powdered under direct sunlight which affects the beauty of coating.
Products used
|
Number of classes
|
Dry film thickness
|
EXLBT colorless Epoxy concrete substrate primer
|
1
|
60 ± 10 µm / layer
|
Epoxy color coating (Benzo Color Catalog)
|
2
|
50 ± 10 µm / layer
|
Sản phẩm cùng loại